HONDA 2012 Pilot - Manual (Page 309)

The scan function samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
The skip (seek)
function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (
or
) of the SKIP bar, then release
it.
To scan with the interface dial, push
the interface selector down, and turn
the interface dial to select Scan, then
press ENTER on the interface
selector.
The system will scan for a station
with a strong signal. When it finds a
strong signal, it will stop and play
that station for about 10 seconds. If
you do nothing, the system will then
scan for the next strong station and
play it for 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
CONTINUED
SCAN
SKIP (SEEK)
Playing the FM/AM Radio (Models with navigation system)
Fe
a
tu
re
s
301
11/08/01 09:07:54 31SZA630_308