Climate control system – HONDA 2012 Pilot User Manual
Page 212
For your safety, make sure you have
a clear view through all the windows
before driving.
Airflow is divided between
the floor and corner vents and the
defroster vents at the base of the
windshield.
This button directs the main airflow
to the windshield for faster
defrosting. It also overrides any
mode selection you may have made.
When you select
, the system
automatically switches to fresh air
mode and turns on the A/C. For
faster defrosting, manually set the
fan speed to high. You can also
increase airflow to the windshield by
closing the corner vents on the
dashboard. To close the vents, rotate
the wheel under each corner vent.
When you turn off
by
pressing the button again, the
system returns to its former settings.
When the indicator in the button is
on, the front passenger’s
temperature cannot be set separately
from the driver’s.
This button turns the rear window
defogger off and on (see page
).
Air flows from the floor
vents.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the center
and corner vents in the dashboard.
Use the mode control button to
select the vents the air flows from.
Some air will flow from the
dashboard vents in all modes.
Pushing this button also turns the
power mirror heaters on and off.
129
If equipped
Windshield Def roster Button
Rear Window Def ogger
Button
Mode Control
Climate Control System
/
204
11/08/01 08:51:21 31SZA630_211