Installing a child seat – HONDA 2012 Pilot User Manual
Page 59
To install a LATCH-compatible child
seat in the passenger’s side seating
position of the third row:
Unlatch the detachable seat belt
anchor latch and retract the seat
belt all the way into the passenger’s
side panel. Place the latch plate
and anchor latch in their holding
slots (see page
).
You can find lower anchors in the
slits in the seat-backs.
The location of each lower anchor is
indicated by a small button above the
anchor point.
Follow steps 1 through 6 of the
second row installation on pages
and
.
If the child seat cannot be installed
properly or interferes with the
head restraint when in the highest
position, remove the head
restraint. Make sure the removed
head restraint is secured in a safe
place.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
1.
2.
3.
4.
163
50
48
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
51
LOWER ANCHORS
11/08/01 08:24:56 31SZA630_058