Canon MF3010 - Manual (Page 80)

Symbols Used in This Manual
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly.
To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use
the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine
correctly, and avoid damage to the machine or property.
Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the
described operations.
Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be pressed are expressed in this
manual.
▪ Operation panel keys: [Key icon] + (Key name)
Example: [ ] (job cancel key)
▪ Buttons and items on the computer display: [Preferences]
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine.
As these instructions are intended to prevent injury to the user and other persons or to prevent destruction of
property, always pay attention to these instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform any operation unless otherwise
specifi ed in the manual.
Installation
WARNING
▪ Do not install the machine in a location near alcohol, paint thinner, or other fl ammable substances. If
fl ammable substances come into contact with electrical parts inside the machine, this may result in a fi re or
electrical shock.
▪ Do not place the following items on the machine.
- Necklaces and other metal objects
- Cups, vases, fl owerpots, and other containers fi lled with water or liquids
If these items come into contact with a high-voltage area inside the machine, this may result in a fi re or
electrical shock. If these items are dropped or spilled inside the machine, immediately turn off the power
switches of the machine and computer (1) and disconnect the interface cable if it is connected (2). Then,
unplug the power plug from the AC power outlet (3) and contact your local authorized Canon dealer.
OFF
(3) (1)
(1)
(2)
(3)
CAUTION
▪ Do not install the machine in unstable locations, such as on unsteady platforms or inclined fl oors, or in
locations subject to excessive vibrations, as this may cause the machine to fall or tip over, resulting in
personal injury.
▪ The ventilation slots are provided for proper ventilation of working parts inside the machine. Never place
the machine on a soft surface, such as a bed, sofa, or rug. Blocking the slots can cause the machine to
overheat, resulting in a fi re.
▪ Do not install the machine in the following locations, as this may result in a fi re or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam, such as near a cookery or humidifi er
- A location exposed to rain or snow
- A location near a water faucet or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open fl ames
▪ When installing the machine, gently lower the machine to the installation site so as not to catch your hands
between the machine and the fl oor or between the machine and other equipment, as this may result in
personal injury.
▪ When connecting the interface cable, connect it properly by following the instructions in this manual. If not
connected properly, this may result in malfunction or electrical shock.
▪ When moving the machine, follow the instructions in this manual to hold it correctly. Failure to do so may
cause you to drop the machine, resulting in personal injury.
e-Manual -> "Maintenance" -> "Transporting the Machine."
Power Supply
WARNING
▪ Do not damage or modify the power cord. Also, do not place heavy objects on the power cord or pull on or
excessively bend it. This can cause electrical damage, resulting in fi re or electrical shock.
▪ Keep the power cord away from all heat sources. Failure to do so can cause the power cord insulation to
melt, resulting in a fi re or electrical shock.
▪ The power cord should not be taut, as this may lead to a loose connection and cause overheating, which
could result in a fi re.
▪ The power cord may become damaged if it is stepped on, fi xed with staples, or if heavy objects are placed
on it.
▪ Continued use of a damaged power cord can lead to an accident, such as a fi re or electrical shock.
▪ Do not plug or unplug the power plug with wet hands, as this can result in electrical shock.
2