SOEHNLE Body Balance Slim F5 - Manual (Page 20)

20
PREPARATION
1. Remove battery safety strip.
Note:
After removing the battery safety strip,
immediately place the body analysis scale
(while "0.0” is still displayed) on a level sur-
face and wait until the scale switches off
automatically.
After this, begin data entry.
2. Place the scale on a level and
hard surface (not carpet) for
all measurements.
3. Attention! Hazard of slips on wet surfaces.
4. Cleaning and care: Only clean using a slight-
ly damp cloth. Do not use solvents or abrasi-
ve cleaning agents. Do not submerge the
scale in water.
5. Option to switch from kg/cm to lb/in or st/in
(while scale is switched on) for country spe-
cific settings.
CONTROL ELEMENTS
1. Confirm
2. Minus
3. Plus
3V
CR2430
+
3V
CR2430
+
1 2 3
4.
5.
2.
1.
GB
BA63721slimF5_120863_V10.qxd:BA63721slimF5_120863_V9.qxd 05.01.2010 13:20 Uhr Seite 20