Edimax Technology WP-S1300 - Manual (Page 92)

as „Remote‟) is not blocked by any object, especially
when you inserted USB peripheral in front USB slot.
4. If there‟s strong / fluorescent light source near IR
transmitter / receiver, remote Control may not be able to
function properly.
5. If the distance between IR transmitter / receiver is
longer than 7 meters, remote Control may not working
properly.
Noting displayed
on projector
server‟s display
1. If you‟re using „Black out‟ function, resume it
(„Blackout‟ LED located at the front of projector server
will light).
2. Check the connection between video display and
projector server.
3. If video display you‟re using supports more than one
video mode / source, make sure you selected correct
video mode / source.
4. Make sure you selected correct video output type
(HDMI or VGA).
5. Make sure the video display you‟re using supports
the video output mode you selected (in VGA mode).
6. Make sure the video display is switched on.
I hear some sound
when projector
server is switched
on
1. There‟s a fan inside the projector server and it will
start working when projector server is switched on. This
is normal and is not malfunction.
2. If you smell something strange or even see smoke
come out from projector server, unplug the A/C adapter
(if possible), and return the projector server back to
dealer of purchase immediately.
No image output
via USB display in
1. Make sure the cable is well-connected between
Projector Server and your PC.