Edimax Technology WP-S1300 - Manual (Page 50)

2-10 Using Remote Control
When the presentation is in progress, you can use supplied remote Control to
control the presentation. When using remote Control, point the remote
Control ‟s IR signal transmitter toward the front of projector server.
Name Description
„Black out‟ Button Press this button to activate „Black Out‟ function, which
will remove any display contents displayed on external
display; Press this button again to resume.
„Menu‟ Button Press this button to switch the display output of projector
server between presenter‟s computer display content
and projector server‟s configuration menu.
„Page down‟
button
Equivalent to „Left‟ key on your computer‟s keyboard.
„Page up‟ button Equivalent to „Right‟ key on your computer‟s keyboard.
„Prev.‟ button Select previous user (presenter) in projector server‟s
configuration menu; Equivalent to „Up‟ key on your
computer‟s keyboard when presentation is in progress.
„Next‟ button Select next user (presenter) in projector server‟s
configuration menu; Equivalent to „Down‟ key on your
computer‟s keyboard when presentation is in progress.
button Select user in projector server‟s configuration menu.
Notice:
1) Remote Control only works when the
distance between remote Control and
projector server is shorter than 7 meters.
This distance will be shortened in some
environments, or when the battery state of
remote Control is low.
2) If there’s strong light source near
projector server and / or remote Control,
remote Control may not be able to function
properly.