Edimax Technology WP-S1300 - Manual (Page 20)

2-3 Set the IP address of the Computer
If there‟s no DHCP server available on your LAN, please follow the following
instructions to set the IP address of the computer, so the computers wish to
use the projector server can connect to project server.
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-3-1
Windows 2000 - please go to section 2-3-2
Windows XP - please go to section 2-3-3
Windows Vista - please go to section 2-3-4
Windows 7 - please go to section 2-3-5
2-3-1 Windows 95/98/Me IP address setup:
1.
Click „Start‟ button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select „TCP/IP‟, then click „Properties‟.