Edimax Technology WP-S1300 - Manual (Page 63)

3-5-1 ‘Basic’ Settings
You can configure basic wireless network settings from this menu.
The description of every setting item will be described below:
Item Description
Enable Wireless
pass through
without login.
Tick the box to enable the function allows other users
not in the presentation to access the Projector Server
as an AP.
Wireless Function
Select „Enable‟ from dropdown menu to enable wireless
network function; select „Disable‟ to disable wireless
network function (wireless radio off).
Mode Select wireless mode. Only AP (Access Point) mode is
supported currently.
Band Select the wireless band. Available options are:
2.4GHz (B) - supports 802.11b wireless clients only.
2.4GHz (N) - supports 802.11 Draft-n wireless clients
only.
2.4GHz (B+G) - supports 802.11b and 802.11 Draft-n