Edimax Technology WP-S1300 - Manual (Page 60)

3-4 Network Setting
You can use this menu to change the setting of wired Ethernet connection and
DNS (Domain Name Service) server.
The description of every setting item will be described below:
Item Description
Obtain an IP
address
automatically
Select this option and projector server will obtain an IP
address from the DHCP server on your local area
network automatically. If you selected this option but
there‟s no DHCP server on your LAN, projector server
will use IP address „192.168.2.10‟ automatically.
Use the following
IP address
Select this option and projector server will use the IP
address you defined below.
IP address Input the IP address you wish to assign to projector
server.
Subnet Mask Input the subnet mask of the IP address of projector
server.
Gateway address Input the IP address of the gateway of your local area
network. You can leave this field blank and clients on
local area network will still be able to connect to
projector server, but some network functionalities will
not function. For example, if the time server you defined