Edimax Technology WP-S1300 - Manual (Page 78)

The description of every setting item will be described below:
Item Description
Config Mode Select WPS configuration mode: „Registrar‟ (This
projector will accept WPS-compatible wireless client to
send WPS pairing request),
Configure via Push
Button
Click „Start PBC‟ and projector server will enter „WPS
Push-
Button‟ mode. When using this mode, another
WPS-compatible wireless device must also enter WPS
push-button mode with different WPS configuration
mode (i.e. if projector server enters WPS push button
mode in „Registrar‟ configuration mode, another
WPS-compatible wireless device must use
„Enrollee‟
configuration mode; if projector server enters WPS
push button mode in „Enrollee‟ configuration mode,
another WPS-compatible wireless device must use
„Registrar‟ configuration mode.
When you click this button, the button will be grayed-out
and start 2-minute count down. If no WPS-compatible
wireless device enters WPS push button mode within 2
minutes, WPS pairing will be cancelled.
Hint: You can also press ‘WPS’ button located on the
front of projector server to enter WPS mode, too.
Configure via
Client PinCode
If you got another WPS-
compatible wireless device‟s
Self PinCode, you can enter it here, and press „Start
PIN‟ button to start PIN-style WPS pairing.