6 install wireless projector server – Edimax Technology WP-S1300 User Manual

Page 14

1-6 Install Wireless Projector Server

Please follow the following instructions to get the projector server installed:

1. Unpack the wireless projector server‟s package, and make sure no item in

the package is missing.

2. Connect antennas to both antenna connectors located at the back or

projector server - hold antenna base by your finger and turn in clockwise

direction to fasten it.

3. Connect the Ethernet cable to the LAN port (this port is

labeled as „LAN‟ and

located at the back of this projector server)

4. Insert the audio cable which connects with external amplifier / speaker to
„Audio Out‟ port located at the back of this projector server.