Edimax Technology WP-S1100 - Manual (Page 87)

87
as ‘Remote’) is not blocked by any object.
4. If there’s strong / fluorescent light source near IR
transmitter / receiver, remote controller may not be able
to function properly.
5. If the distance between IR transmitter / receiver is
longer than 7 meters, remote controller may not
working properly.
Noting displayed
on projector
server’s display
1. If you’re using ‘Black out’ function, resume it
(‘Blackout’ LED located at the front of projector server
will light).
2. Check the connection between video display and
projector server.
3. If video display you’re using supports more than one
video mode / source, make sure you selected correct
video mode / source.
4. Make sure you selected correct video output type
(HDMI or VGA).
5. Make sure the video display you’re using supports
the video output mode you selected (in VGA mode).
6. Make sure the video display is switched on.
I hear some sound
when projector
server is switched
on
1. There’s a fan inside the projector server and it will
start working when projector server is switched on. This
is normal and is not malfunction.
2. If you smell something strange or even see smoke
come out from projector server, unplug the power
adapter (if possible), and return the projector server
back to dealer of purchase immediately.