Edimax Technology WP-S1100 - Manual (Page 45)

45
2-6-4 Exit
Terminates projector server client software, and you’ll be disconnected from
projector server. To start another presentation, you have to launch client
software again.
2-7 Using Remote Controller
When the presentation is in progress, you can use supplied remote controller
to control the presentation. When using remote controller, point the remote
controller’s IR signal transmitter toward the front of projector server.
Name Description
‘Black out’ Press this button to activate ‘Black Out’ function, which
will remove any display contents displayed on external
display; Press this button again to resume.
‘Menu’ Press this button to switch the display output of projector
server between presenter’s computer display content
and projector server’s configuration menu.
‘Page down’ Equivalent to ‘Left’ key on your computer’s keyboard.
‘Page up’ Equivalent to ‘Right’ key on your computer’s keyboard.
Notice:
1) Remote controller only works when the
distance between remote controller and
projector server is shorter than 7 meters.
This distance will be shortened in some
environments, or when the battery state of
remote controller is low.
2) If there’s strong light source near
projector server and / or remote controller,
remote controller may not be able to
function properly.