Edimax Technology WP-S1100 - Manual (Page 24)

24
When the projector server is powered on and connected to a LAN with DHCP
server, it will get an IP address from DHCP server automatically; when there’s
no DHCP server available, it will use default IP address ‘169.254.0.200’.
Please refer to chapter 2-3 ‘How to set IP address for your computer’ to set the
IP address for computers wish to connect to projector server when there’s no
DHCP server available.
The IP address of projector server can be found on the connected external
display, like following picture:
The IP address of the WLAN (wireless Ethernet) and LAN (wired Ethernet)
interface of projector server can be found at the lower-left corner of video
display. You can use one of these IP addresses to connect to the projector
server.
The IP Address (Wireless / Wired Ethernet)
of projector server can be found here.
You can get Login Code here,
and the code is a random.