Edimax Technology WP-S1100 - Manual (Page 20)

20
1-6 Install Wireless Projector Server
Please follow the following instructions to get the projector server installed:
1. Unpack the wireless projector server’s package, and make sure no item in
the package is missing.
2. Stick the foot pads on the 4 locations indicated on the picture shown below if
you plan to put the projector server on the desk or other horizontal places.
You can skip this step if you plan to hang the projector server on the wall, and
use the 2 wall-mounting holes located at the bottom of the projector server to
do this.
3. Connect the Ethernet cable to the LAN port (this port is labeled as ‘LAN’ and
located at the back of this projector server)
4. Insert the audio cable which connects with external amplifier / speaker to
‘Audio Out’ port located at the back of this projector server.
You can skip this step if you don’t have external audio amplifier / speaker.