Edimax Technology WP-S1100 - Manual (Page 56)

56
Gateway address Input the IP address of the gateway of your local area
network. You can leave this field blank and clients on
local area network will still be able to connect to
projector server, but some network functionalities will
not function. For example, if the time server you defined
is not located within local area network, projector server
will not be able to access Internet and synchronize with
time server.
DNS address Input the IP address of DNS server here (DO NOT input
the host name of DNS server here!).
Secondary DNS
Address
You can input another DNS server’s IP address here,
so if projector server fails to connect to the DNS server
listed above, it will use the DNS server’s IP address
listed in this field instead.
You can leave both fields of DNS server blank, and
most functionalities of this projector server will still
function. However, you have to input IP address, not
host name, for all servers required by this projector
server (like NTP server).
When you finish, please click ‘Apply’ button to save changes you made; to
discard changes, click ‘Cancel’ button. If you click ‘Apply’, you’ll see the
following message:
Click ‘Continue’ to continue on projector server setting, or click ‘Apply’ to
reboot projector server, and changes you made will take effect after projector
server rebooted.