Edimax Technology WP-S1100 - Manual (Page 69)

69
Encryption Key 1
to 4
Input WEP key characters here, the number of
characters must be the same as the number displayed
at ‘Key Format’ field. You can use any alphanumerical
characters (0-9, a-z, and A-Z) if you select ‘ASCII’ key
format, and if you select ‘Hex’ as key format, you can
use characters 0-9, a-f, and A-F. You must enter at least
one encryption key here, and if you entered multiple
WEP keys, they should not be same with each other.
Enable 802.1x
Authentication
Check this box to enable 802.1x authentication.
RADIUS Server IP
address
Please input the IP address of RADIUS authentication
server here.
RADIUS Server
Port
Please input the port number of radius server here.
RADIUS Server
Password
Please input the password of radius server here.
When you finish, please click ‘Apply’ button to save changes you made; to
discard changes, click ‘Cancel’ button. If you click ‘Apply’, you’ll see the
following message:
Click ‘Continue’ to continue on projector server setting, or click ‘Apply’ to
reboot projector server, and changes you made will take effect after projector
server rebooted.