Edimax Technology PS-2207SUg - Manual (Page 49)

42
Parameters Description
Default Key
Select the default key from the key1 to 4. The default
key will be used to encrypt the transmission data from
the server.
Note: The default key on the wireless device that you
want to connect and the server can have different
default WEP keys as long as the keys are in the same
order. In other words, the wireless device can use WEP
key 2 as its default key to transmit, while the server can
use WEP key 3 as its default key to transmit. The two
devices will communicate as long as the wireless
device's WEP key 2 is the same as the server's WEP
key 2, and the wireless device's WEP key 3 is the same
as the server's WEP key 3.
Encryption Key
1-4
Enter the four sets of keys; the key order should be the
same as the wireless device you want to connect.
64-bit – Input 10-digit Hex values (in the “A-F”, “a-f” and
“0-9” range) or 5-digit ASCII characters (including “a-z”
and “0-9”) as the encryption keys. For example:
“0123456aef“ or “test1”.
128-bit – Input 26-digit Hex values (in the “A-F”, “a-f”
and “0-9” range) or 13-digit ASCII characters (including
“a-z” and “0-9”) as the encryption keys. For example:
“01234567890123456789abcdef“ or “administrator”.
Click <Apply> at the bottom of the screen to save the above configurations.