Edimax Technology PS-2207SUg - Manual (Page 43)

36
8.4 Wireless (PS-2207Sug only)
If you want to use the server through wireless LAN, please set up the server
through Ethernet first and make sure your wireless LAN setting is correct.
After setting the wireless LAN, unplug the Ethernet cable and restart the
server, then you can start to use the server through wireless LAN. If the
wireless configuration does not work, please plug the Ethernet cable again,
restart the server and configure the server through Ethernet until the wireless
LAN settings are correct.
8.4.1 Site Survey
This page allows you to enable/disable the wireless function and set the
wireless networks that you want to connect. If you want to automatically
search and connect to the wireless networks nearby, please click “Site
Survey” button.