Print server installation – Edimax Technology PS-2207SUg User Manual

Page 19

6. Print Server Installation

This server provides a Print Server Setup tool for you to add the network port

of the server to your computer automatically. After you have added the

network port, you can run the standard “Add Printers” procedures in the

Windows to install the printer with the print server.

The program can be performed on Windows 98SE/Me/2000/XP/2003 with the

same user interface. Before installation, please confirm that your PC has

already connected to the network and installed TCP/IP network protocol.

Please follow the steps below to start installation.

1. Insert the CD shipped along with the server into your CD-ROM drive. The

Autorun.exe program should be executed automatically. If not, run

Autorun.exe manually from “Autorun” folder in the CD.

2. The following screen will be displayed. Click “Print Server Utility”.