Edimax Technology PS-2207SUg - Manual (Page 10)

3
3. Hardware Installation
Step 1. Connect the server to your LAN network
Connect the server to your PC, hub or switch by attached the Ethernet cable
to the LAN port of the server.
Step 2. Connect the USB devices to the USB ports of the server
You could connect the USB mass storage or printer to any one of two ports for
files or printer sharing.
Note 1: It is recommended to plug the external power to your USB mass
storage devices if the USB LED of the connected port is not lit.
Note 2: Please plug the USB mass storage dedicated to this server in the USB
port 1 for disk management such as Add/Delete Partitions or Format the disk. If
you just want to share the USB mass storage, you can plug the storage in USB
port 1 or 2.
Note3: USB Flash Disk has to be plugged to USB port 2.
Step3: Connect the power adapter to the server
You must use the power adapter shipped along with the server, do NOT use
any other power adapter from other sources.