Edimax Technology PS-2207SUg - Manual (Page 45)

38
Parameters Description
Band
2.4GHz (B) – This server can be compatible with both
802.11g and 802.11b wireless devices. If there are only
802.11b wireless devices in the network, you can set
the server to this mode.
2.4GHz (G) – This server can be compatible with both
802.11g and 802.11b wireless devices. If there are only
802.11g wireless devices in the network, you can set
the server to this mode.
2.4GHz (B+G) – If you have a mix of 802.11b and
802.11g wireless devices in your network, it is
recommended to set the server to this mode. This mode
is also the default setting.
ESSID
The ESSID (up to 32 printable ASCII characters) is the
unique name identified in a WLAN. The ID prevents the
unintentional merging of two co-located WLANs.
You may specify an ESSID for the server and then only
the device with the same ESSID can interconnect to the
server. By default, the ESSID of the server is “default”.
Channel
The radio channel used by the wireless LAN. All devices
in the same wireless LAN should use the same channel.
When you have set the wireless mode to Ad Hoc, you
have to select the channel that is used in the Ad Hoc
network.
Site Survey
Click “Site Survey” and then the server will scan all the
channels to find all the access points/routers/stations
within the accessible range of your server. You can then
connect to one of the networks you have selected.
Click <Apply> at the bottom of the screen to save the above configurations.