Edimax Technology NS-2502 User Manual
Page 9
8
this situation, the LED will keep flashing about 30 seconds
and go off).
USB2
ON
USB storage device is connected to USB2 port
Off
USB storage device is not connected to USB2 port or is not
detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
Slow
Flashing
The used space of the USB mass storage is over 95% or
the USB Copy tool is copying from the USB mass storage
device plugged to USB2 port.
Fast
Flashing
The USB mass storage is full or the USB Copy tool is
copying from the USB mass storage device plugged to
USB2 port, but this job faces some error and is stopped (In
this situation, the LED will keep flashing about 30 seconds
and go off).
HDD
ON
Internal SATA hard disk drive is installed
Off
Internal SATA hard disk drive is not installed or is not
detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
Slow
Flashing
The used space of the internal SATA hard disk drive is over
95%.
Fast
Flashing
The internal SATA hard disk drive is full.