Edimax Technology NS-2502 - Manual (Page 19)

18
2.6 Confirm Settings
List the setting values of Quick Setup for your confirmation.
Click “Prev” to go to the previous step of Quick Setup.
Click “Apply” to make all the settings of Quick Setup take effect.
Click “Cancel” to abort the Quick Setup. Any modified settings during this Quick
Setup session will not take effect.
2.7 Apply Settings
After you click “Apply” in the confirmation page, the following page will display and
the Quick Setup will start to apply the settings to the storage server. It will take
several minutes to apply the settings.
After the Quick Setup settings values are applied, the storage server will restart and
the following page will display. Please wait for a while.