Edimax Technology NS-2502 User Manual

Page 57

11.3 USB Copy

USB Copy tool allows you to copy the content of one external USB mass storage device to
another attached storage device. When you press the Copy button on the front panel of
this storage server, the copy job will be triggered.

Note: Before you trigger the USB Copy function by pressing the Copy button on the front
panel of this storage server, make sure that the destination folder has enough free space
to store all data of the source USB mass storage device.

Parameters

Description

Source Path

Select USB port that the source USB mass storage device of the
USB Copy job will be plugged in.

Saved Path

Select a shared folder as the destination of the USB Copy. The
USB Copy tool will create a folder named “USBCopy” under the
shared folder you selected. Each time when you press the Copy
button on the front panel of the storage server to trigger the USB
Copy job, a new folder named with the trigger time will be created
under the “USBCopy” folder and the newly created folder will be
the destination folder of the USB Copy job.

Click <Save> button to save the configurations.