Edimax Technology NS-2502 - Manual (Page 16)

15
Chapter 2
Quick Setup
Quick Setup will guide your through the basic settings of the storage server step by
step. When you click “Quick Setup” in the left menu, a Quick Setup window will pop
up.
Note: If this is the first time the internal SATA hard disk drive is used in the storage server,
the storage server will automatically erase old partitions and data in the internal SATA
hard disk drive and re-create partition and format the internal SATA hard disk drive. Please
make sure original valuable data in the internal SATA hard disk drive is backed up before
doing Quick Setup.
2.1 Password
Enter the new password of storage server. A valid password should consist of 0~30
alphanumeric characters. The New Password and the Confirm Password should be
the same.
Click “Next” to go to the next step of Quick Setup.
Click “Cancel” to abort the Quick Setup. Any modified settings during this Quick
Setup session will not take effect.
2.2 Network
Setup the IP address and DNS address of the storage server. You can manually
assign IP address or let the storage server to obtain IP address from DHCP server
automatically. For more detail information, you can refer to Chapter 4.