Edimax Technology NS-2502 - Manual (Page 8)

7
4. LED
On the storage server’s front panel there are LEDs, which show the status of
this storage server. Below is the list of each LED and its description.
NS-2501 NS-2502
LED
Light
Status
Description
Power
ON Storage server is powered on
Off Storage server is shut down
Slow
Flashing
Storage server is starting; or the storage server is shutting
down; or the storage server is restoring its settings to
factory default values.
LAN
ON LAN port is connected
Off LAN port is unconnected
Flashing Data is transferring through the network
Status
ON The storage server is working well
Off
The storage server is not ready to provide service. Please
go to the Web GUI to configure the storage server.
Slow
Flashing
The storage server has some problem. Please go to the
Web GUI to check the status of the system to find out the
problem.
USB1
ON USB storage device is connected to USB1 port
Off
USB storage device is not connected to USB1 port or is not
detected due to hard disk failure or the system is doing
partition/format on this hard disk drive.
Slow
Flashing
The used space of the USB mass storage is over 95% or
the USB Copy tool is copying from the USB mass storage
device plugged to USB1 port.
Fast
Flashing
The USB mass storage is full or the USB Copy tool is
copying from the USB mass storage device plugged to
USB1 port, but this job faces some error and is stopped (In