Updating the telephone image files, Updating the, Telephone image files – 3Com Notes for 3Com User Manual
Page 8: Sect
Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3
Page 8
Data bits – 8
Parity – None
Stop bits – 1
Flow Control – None
SSH
The default root password for SSH is
digium
.
b)
Create or edit the custom.cfg file, which resides in the
var/lib/asterisk/sounds/phoneprov_configs/ folder on the CompactFlash card.
The custom.cfg file is in xml format and specifies the user-defined settings that will be provided
to all phones that use the appliance.
The following shows the contents of the polycom.xml file, which you can use as a template:
9]xxxxxxxxx|911|[89]911|[89]1800xxxxxxx|[89]1855xxxxxxx|[89]1866xxxxxxx|[89]1877
xxxxxxx|[89]1888xxxxxxx" dialplan.1.digitmap.timeOut="3"
dialplan.2.digitmap="1xxx|5xxx|6xxx|7xxx|9xxxxxxxT|91xxxxxxxxxx|9[2-
9]xxxxxxxxx|911|[89]911|[89]1800xxxxxxx|[89]1855xxxxxxx|[89]1866xxxxxxx|[89]1877
xxxxxxx|[89]1888xxxxxxx" dialplan.2.digitmap.timeOut="3"
/>
The pattern explanations include:
1xxx
Internal
ext
5xxx
Internal
ext
6xxx
Internal
ext
7xxx
Internal
ext
9xxxxxxxT
Local 7 digit
91xxxxxxxxxx
Long
distance
9[2-9]xxxxxxxxx
Local 10 digit
911
Emergency
911
[89]911
Emergency 911 or 811
[89]1800xxxxxxx
Toll
free
[89]1855xxxxxxx
Toll
free
[89]1866xxxxxxx
Toll
free
[89]1877xxxxxxx
Toll
free
[89]1888xxxxxxx
Toll
free
Updating the Telephone Image Files
If you have been instructed to update the 3Com telephone image files, follow these steps.
1
Make sure that you have updated the bootloader image (see
) and the 3Com Asterisk Appliance firmware image (see
).
2
Establish a connection from your PC to the appliance using one of the following:
Terminal emulation software (such as HyperTerminal), using an adapter to connect the
serial port on the 3Com Asterisk Appliance to the serial port on your PC.
The terminal settings are: