Step 4, Step 5, Depen – 3Com Notes for 3Com User Manual
Page 7
Release Notes for 3Com Asterisk Appliance Release 1.4.0.14.3
Page 7
e)
Select the image file that is on your PC and then click Upload Image.
f)
Reboot the appliance.
4
If you have been provided with a software file name and a TFTP server address:
a)
Click
the
TFTP Server radio button.
b)
Type the software file name and TFTP server address in the dialog boxes.
c)
Click
Go.
5
If you downloaded the image to your PC:
a)
In
the
Upload a new image section, click Browse.
b)
Select the local image file on your PC and then click Upload Image.
c)
Reboot the appliance.
6
If necessary, customize the default configuration to modify 911 connectivity, service
providers, user names, calling rules, passwords, NTP server, SSH access, GUI access using
the WAN, and the like. See the 3Com Asterisk Appliance Administrator’s Guide for the
default configuration settings. Make sure that you save all changes. See
for information about how to save changes in the 3Com AsteriskGUI.
Note: See the NTP: Network Time Protocol Some web site
or a list of NTP
servers. Some commonly used NTP servers include:
tick.ucla.edu / tock.ucla.edu (Los Angeles, California)
time.nist.gov (Boulder, Colorado)
tick.mit.edu (Boston, Massachusetts)
7
Upload the appropriate timezone files from the 3Com Partner Access Web site. If your
configuration includes analog lines, calibrate the analog service provider:
a)
Click
the
Service Providers tab.
b)
Click
the
Options drop-down list for the analog service provider.
c)
Click
Calibrate.
d)
Save your changes. See
for information about how to
save changes in the 3Com AsteriskGUI.
9
If you changed the dial plan calling rules for outgoing calls, you might want to create a
telephone provisioning custom configuration file (custom.cfg), or update an existing
configuration file if it exists, so that you do not have to press the # key after you dial.
a)
Establish a connection from your PC to the appliance using one of the following:
Terminal emulation software (such as HyperTerminal), using an adapter to connect the
serial port on the 3Com Asterisk Appliance to the serial port on your PC.
The terminal settings are:
Baud Rate – 57600