3Com 1000 - Manual (Page 70)

4-26 C HAPTER 4: M ANAGING T HE S WITCH 1000
Speed 1200 / 2400 / 4800 / 9600 / 19200
This field allows you to select the correct line speed
(baud rate) for your terminal or modem. If you
have enabled auto-configuration, line speed is set
automatically.
Char Size 8 This read-only field shows the character
bit (data bit) size for the Switch. You should set your
terminal to the same value.
Parity NONE This read-only field shows the parity
setting for the Switch. You should configure your
terminal to the same setting.
Stop Bit 1 This read-only field shows the stop bit
setting for the Switch. You should configure your
terminal to the same setting.