Xerox 332 - Manual (Page 55)

Xerox Document Centre 220/230/332/340 Setup Guide Page 4-9
Copy Setups
Copy Setups
Copy Setup
s
Auto Exposure À select a default setting of On to enhance documents with
colored backgrounds or Off to disable this feature.
Margin Shift (DC332/340)
Programs the default amount of Margin Shift to move the
image up/down or side to side on one or both sides of a
page. Margin Shift can be applied to side one and side two
of a page.
À Access Copy Setups as described at the beginning of this
chapter.
À Touch the Margin Shift button.
Erase (DC332/340)
Programs the default settings for the Edge Erase and Border
Erase features. The factory default is set for all the erase
features switched off and the erase values set to 0 inches.
À Access Copy Setups as described at the beginning of this
chapter.
À If necessary, touch the Additional Setups button
À Select the Side 1 or Side 2
button to change the setting
or Off to disable this feature.
À If Side 2 shift is selected,
select Independent and the
settings or Mirror to mirror
side 1 settings.
À Touch Save to continue.