Xerox 332 - Manual (Page 17)

Xerox Document Centre 220/230/332/340 Setup Guide Page 2-3
Abo
u
t Setups
About
Setups
Copy Setups enables the Copy specific default settings to be changed or
set up, including Reduce/Enlarge, Image Quality, Output,
Sides Imaged, Expert Image Quality, Margin Shift and
Erase.
Refer to “Copy Setups” on Page 4-1 for further information.
Fax Setups enable the Fax specific default settings to be changed or set
up, including Fax Terminal Options, Fax Printing Options,
Fax Report Options, Fax Panel Defaults, Fax Mailboxes and
Fax File Management.
Refer to “Fax Setups” on Page 5-1 for further information.
System Administrator Tools
If a PIN is entered that has been assigned ‘System
Administrator’ access rights, the user can set up or change
the settings for the Scan to File and Print features.
Refer to the System Administration Guide for further
information.
Auditron Administrator Tools
If a PIN is entered that has been assigned ‘Auditron
Administrator’ access rights on the DC332/340, or ‘Owner’
access rights on the DC220/230, the user can set up or
change the Auditron settings.
The Internal Auditron is a feature which records machine usage by account and
restricts usage and/or access.
Refer to “Internal Auditron - DC332/340” on Page 6-3 or
“Internal Auditron - DC220/230” on Page 6-10 for further
information.
Foreign Interface Device external control devices such as a coin-operated device, a
bill acceptor, a card reader, or a network controlled tracking
system installed on the system are also covered in this
chapter.
Refer to “Foreign Interface Device” on Page 6-15 for further information.