Xerox 332 - Manual (Page 28)

Page 3-8 Machine Setup
Power Save (or Auto Off)
The Power Save or Auto Off feature function is dependent
on machine configuration.
Auto Off Mode/Sleep Mode
(Power Save)
60 minutes after the last copy/print out the machine will
automatically switch into Auto Off/Sleep (Power Save)
Mode.
The copier version of the Document Centre 220/230
switches the Power ON/OFF switch to the off position. Any
stored jobs remain in the memory and the Document Centre
220/230 returns to an operational condition when powered
on.
NOTE: If Low Power is set higher than Power Save/Auto
Off, the machine displays a message that Low Power
cannot exceed Power Save/Auto Off.
Contention
À Access Machine Setups as described on Page 3-1.
À Touch the Contention button.
À Touch any button to change the setting - a description of
each follows.
À Make changes as required.
À Touch Save to continue.
À Touch the Auto Off or Power
Save button.
À Touch the scroll buttons to
select the desired timeout
period.
À Touch Save to continue.