Accessing fault override – Xerox 332 User Manual
Page 36
Page 3-16
Machine Setup
Accessing Fault Override
To access Fault Override Mode, a fault screen must
currently be displayed on the Touch Screen.
À
Press the Access button on the Control Panel.
À
Touch the # and enter a PIN (Personal identification
Number) with Key Operator access rights - see NOTE
below.
À
Select confirm to delete the current job and or disable
the faulty component.
NOTE: The default password - #22222 - may be used if
PINs have not been assigned. Refer to “Access Rights” on
Page 7-1 for more information.