Zebra Technologies Mobile Printer - Manual (Page 18)

O-18
Cameo 2/3 Series User Guide
printer and/or alcohol and cotton swabs.
Linerless Media Printers
Printers using linerless media require more frequent clean-
ing. Linerless media deposits adhesive which must be re-
moved for optimum performance. Linerless printers can be
identified by a platen which is not black, or by reading the
unit’s fifteen digit Product Configuration Code (PCC) label on
the back of the printer. PCC digit “8” will be “B”, “”D”, “F”, or
“H” for linerless printers.
Note • It is not necessary to clean the platen on linerless units.
The platen material is self cleaning and will not require constant
maintenance.
Caution • Never use any sharp objects on the printer mechanism as it
could damage the printhead. Use only isopropyl alcohol, the supplied
cleaning pen and /or a cotton swab for cleaning the printer.
• Open the printer by squeezing the finger grips on either
side of the media compartment cover.
• Surfaces inside the media compartment that come
in contact with the linerless media adhesive should be
cleaned, along with:
• The print mechanism area around the Sensor
• The printhead
• The inside surface of the edge guide
Allow printer to dry before resuming printing.