Zebra Technologies Mobile Printer - Manual (Page 13)

O-13
Cameo 2/3 Series User Guide
Installation of Media
The following details media installation:
Cameo Media Installation
Cameo 2 is illustrated. Loading procedure is identical for all Cameo
Series printers
1. Turn unit off.
2. Squeeze the two finger grips on either side of the media
compartment cover. Rotate the top back to reveal the pa-
per compartment.
3. If necessary, adjust the edge guide as shown for the me-
dia to be used.
The edge guide should be set into the nearest slot in the
continued
Squeeze finger grips
here on both sides to
open cover
Feed media in this direction
Adjust edge guide to desired
position and snap into place.
Media must spin freely.
Edge Guide
Media must fit between
the edge guide and the
printer frame as shown.