For midi-related settings, Kit/midi/assign 1/5, Altgroup sliderselect – Yamaha DTX700 User Manual

Page 20

KIT

DTX700 Reference Manual

Alternate Group (AltGroup)

Use this parameter to assign voices to alternate groups (i.e.,
monophonic sets of pads, only one of which can be producing a
sound at any time). If you do not want various individual voices
to be played together, they should be assigned to the same alter-
nate group. Whenever voices from the same alternate group are
triggered by playing the pads, the latter voice is given priority and
the earlier one is silenced. Set this parameter to “off” if you do
not want to assign to an alternate group.

Settings:

off, hhOpen, hhClose, 1 to 124

NOTE

•

The “hhOpen” and “hhClose” alternate groups operate in a
special way: If a voice from the “hhClose” group is triggered
after a voice from the “hhOpen” group, the hhOpen voice is
silenced and only the hhClose voice is played. No silencing of
the earlier sound is performed for any other triggering
sequence (for example, hhOpen followed by hhOpen; hhClose
followed by hhOpen; or hhClose followed by hhClose).

SliderSelect

Use this parameter to select the slider for controlling the volume
of the current pad’s voices.

Settings:

kick, snare, tom, cymbal, hihat, no asg (selected when
no assignment is required)

KIT/MIDI

 List of Functions

MessageType

Use this parameter to set the type of MIDI message that will be
sent whenever the current pad is struck.

For MIDI-related settings

KIT/MIDI/ASSIGN 1/5

note

A MIDI note will be sent. Use this setting if you wish
to produce a sound by striking the pad.