Zoom ZoomAir USB Client - Manual (Page 24)

24 ZoomAir USB Client Installation Guide & Reference Manual
no longer want to use a profile, you can remove it by clicking the
Delete button.
Tip: You can also select a profile by right-clicking the WLAN icon
in the system tray.
Transmit Rate— The USB Client provides several data rate
options, including Fully Auto, 2 Mb, Auto 1 or 2 Mb, 5.5 Mb,
and 11 Mb.
For most networks, the factory default Fully Auto will prove the
most efficient. This setting allows the USB Client to adjust and
operate at the maximum possible data rate. When the
communication quality drops below a certain level, the Client
automatically switches to a lower data rate (transmissions at lower
data speeds are usually more reliable). When the communications
quality improves again, the unit gradually increases the data rate
until it has achieved the highest available transmit rate.
WEP— Wireless Equivalent Privacy is meant to prevent
unauthorized wireless clients from accessing data transmitted over
the network.
To activate WEP, check the WEP Enabled check box that
appears under the Profile field.
An Encryption dialog box displays.