Zebra Technologies RW SERIES - Manual (Page 53)

53
RW Series User Guide
continued
General Cleaning Instructions
Caution • Always turn the printer off before cleaning.
To avoid possible personal injury or damage to the printer, never insert
any pointed or sharp objects into the printer.
Use care when working near the Tear Bar. The edges are very sharp.
Caution • The printhead can become very hot after prolonged printing.
Allow it to cool off before attempting any cleaning procedures.
Caution • Use only cleaning agents specified in the following table.
Zebra Technologies Corporation will not be responsible for damage
caused by any other cleaning materials used on this printer.
Clean the printer with either the cleaning pen supplied with the printer
or a cotton swab saturated with alcohol.