Zebra Technologies RW SERIES - Manual (Page 21)

21
RW Series User Guide
dia guides and up through the media compartment as
shown. Make sure the side of the media you will be print-
ing on faces the printhead.
4. Close the Media Cover: Refer to Figure 11.
• Pull the media out of the printer as shown at “1.”
• Close the media cover as shown at “2”, ensuring that it
latches securely into place.
• Turn the printer on or press the Feed button if the printer
is already on.
The printer will advance a short strip of media and will then
be ready for printing.
Figure 11: Closing the Media Cover
Press Media Cover
firmly when closing
to ensure it latches
in place.
Pull Media out of
the Printer