Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 97)

Other settings [FUNCTION]
CLP-380 Owner’s Manual 97
Detailed Settings
You can assign a function to the pedal connected to the
Clavinova’s AUX PEDAL jack.
See the procedure on page 80.
Setting range:
Same as “Right pedal function assignment” (page 96).
Normal setting:
Expression
Yamaha FC7 foot controller
This foot controller is suitable for controlling Expression, SustainCont, or
PitchBend Up/Down.
Yamaha FC4 foot switch
Yamaha FC5 foot switch
These foot switches are suitable for controlling Sustain, Sostenuto, Soft,
RotarySpeed, or VibeRotor.
This turns the right pedal function on or off for the
relevant voice part. In other words, you can select the
desired voice part (Main, MainLayer, Left, LeftLayer) and
determine whether the right pedal function (set on
page 96) will affect that part or not.
See the procedure on page 80.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
This turns the center pedal function on or off for the
relevant voice part. In other words, you can select the
desired voice part (Main, MainLayer, Left, LeftLayer) and
determine whether the center pedal function (set on
page 96) will affect that part or not.
See the procedure on page 80.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
This turns the left pedal function on or off for the
relevant voice part. In other words, you can select the
desired voice part (Main, MainLayer, Left, LeftLayer) and
determine whether the left pedal function (set on
page 96) will affect that part or not.
See the procedure on page 80.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
Setting the auxiliary pedal function
[AuxPedalFunc]
Turning the right pedal function on/off
[RPedalOnOff]
B
D
NO YES
A
C
AuxPedalFunc Set?-->
Expression
TIP
B
D
NO YES
A
C
RPedalOnOff Set?-->
Main On
Select on or off. Select the voice part for which
the right pedal on/off setting is
to be changed.
Turning the center pedal function on/off
[CPedalOnOff]
Turning the left pedal function on/off
[LPedalOnOff]
B
D
NO YES
A
C
CPedalOnOff Set?-->
Main On
Select on or off. Select the voice part for which
the center pedal on/off setting
is to be changed.
B
D
NO YES
A
C
LPedalOnOff Set?-->
Main On
Select on or off. Select the voice part for which
the left pedal on/off setting is
to be changed.