Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 90)

Detailed settings for the voices [VOICE SETTING]
CLP-380 Owner’s Manual 90
Detailed Settings
This will be displayed only if Rotary is selected for the
DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 80.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 89).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 80.
Setting range:
1 (output only the original sound with almost no effect applied) –
127 (output only the sound processed by the effect)
See the procedure on page 80.
Setting range:
-64 – +63
See the procedure on page 80.
Setting range:
-64 – +63
Resonance can produce a distinctive “peaky” tone, making the sound
brighter and harder.
Equalizer:
An audio equalizer divides the frequency spectrum into multiple regions
and enables the user to adjust the relative amplitude of each region.
See the procedure on page 80.
Setting range:
32 Hz – 2.0 kHz
Setting the rotation speed of the
rotary speaker*
[RotarySpeed (Rot.Speed)]
Adjusting the depth of the DSP effect*
[DSPDepth]
Adjusting the brightness of the
sound*
[Brightness]
B
D
NO YES
A
C
Main Set?-->
RotarySpeed Slow
B
D
NO YES
A
C
Main Set?-->
DSPDepth 127
B
D
NO YES
A
C
Main Set?-->
Brightness 0
Adjusting the resonance effect*
[HarmonicContent (Harmonic)]
Adjusting the low-range frequency of
the equalizer*
[EQ LowFreq. (EQ L.Freq)]
B
D
NO YES
A
C
Main Set?-->
HarmonicContent 0
TIP
TERMINOLOGY
High Gain Low Gain
Low Freq. High Freq.
B
D
NO YES
A
C
Main Set?-->
EQ LowFreq. 32