Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 66)

Internet Direct Connection (IDC)
CLP-380 Owner’s Manual 66
Basic Operation
Error Code List (IDC)
Error Code Meaning
1110 USB wireless LAN adaptor, LAN cable, or router cannot be recognized.
Please check whether a USB wireless LAN adaptor, LAN cable, or router has been correctly connected. Also
check that you are not using a damaged cable.
1120 The USB wireless LAN adaptor connected to the musical instrument does not function
properly.
Make sure to use a USB wireless LAN adaptor whose compatibility has been confirmed by Yamaha
(page 53).
1130 Communication with the access point has failed.
• Please check that all settings of the wireless LAN are correct.
• Please check that the power of the access point is turned on and that the settings of the device are correct.
• Set the instrument within reach of the signal from the access point. The signal will not be received if the
distance from the access point is too great or there is an obstacle blocking reception.
1250 – 1252 IP address could not be obtained from the router.
• (When using a cable LAN connection:) Check that the LAN cable is correctly connected and that the cable
you are using is not damaged.
• (When using a wireless LAN connection:) Check that all settings for the wireless LAN are correct.
• Make sure that the power of the router is turned on. Also, confirm that the router settings allows the use of
DHCP.
• Try turning on the power of the router once again.
1410 – 1415 Connection to the special website has failed.
• Make sure that the power of the router is turned on. Also, confirm that the router settings are correct.
• (When using a fixed IP address, proxy server:) Check that all LAN settings are correct.
• Try turning on the power of the router once again.
2001 Communication error.
Check the communication environment. Try connecting again after a while.
2042 Communication timeout occurred.
• Check that the LAN cable is correctly connected and that the cable you are using is not damaged.
• Make sure that the power of the router is turned on. Also, confirm that the router settings are correct.
• Try turning on the router again.
2404 Server was not found.
Try again after a while.
3001 File access error.
3002 File cannot be read.
3003 Data cannot be written to the file.
3004 There is not enough available memory in the media.
3011 There is not enough space in the assigned folder.
3019 This media has not been formatted.
Format the media after making sure that there is no important data remaining. Please be careful that all data
will be deleted when executing the format.
3020 Write-protect has been enabled for the media.