Yamaha CLAVINOVA C L P - 3 8 0 - Manual (Page 62)

Internet Direct Connection (IDC)
CLP-380 Owner’s Manual 62
Basic Operation
This procedure lets you export the detailed information on the current connection as a text file to a USB flash storage
device. You can check the information on your computer.
Procedure
1.
Call up the screen below.
Hold down the [FILE/SONG SETTING] button, and press the [REC]
button.
2.
Turn on the Export mode.
Make sure that a USB flash storage device is connected to the
instrument, and then press the A [–][+] button.
If the “Export” does not appear in the lower left of the screen, press the C [–][+]
buttons to call up “Export.”
3.
Start exporting.
Press the B [+ (YES)] button.
Overwriting the Connection Information
A “Overwrite?-->” message will appear on the display if a USB storage device
contains a file with the same name as the one you exported before. To overwrite,
press the B [+ (YES)] button again. An “Executing” message appears and the
Clavinova overwrites the data. When overwriting is complete, a “Completed”
message appears for three seconds, before returning to the previous screen.
To cancel overwriting, press the B [– (NO)] button instead of the B [+ (YES)]
button.
Exporting the Connection Information
1
2
1
3
The connection information file
does not allow you to manually
make Internet settings (pages 53
and 57). The connection
information file is set to “read only”
and cannot be edited.
TIP
B
D
NO YES
A
C
Wireless Execute?-->
NetworkSearch
B
D
NO YES
A
C
ConnectInf Execute?-->
Export