Specifying the split point, Setting the right pedal function, Setting the center pedal function – Yamaha CLAVINOVA C L P - 3 8 0 User Manual
Page 96: Setting the left pedal function, Split point, Rpedalfunc, Cpedalfunc, Lpedalfunc, See the procedur e on page 80
Other settings [FUNCTION]
CLP-380 Owner’s Manual
96
Detailed Settings
You can specify the split point (the boundary between the
right-hand and left-hand keyboard areas).
See the procedure on page 80.
Setting range:
A -1
–
C7
You can also use [SPLIT] to set the split point (page 29).
See the procedure on page 80.
Setting range:
Sustain ................... ON/OFF switch type damper
SustainCont............ Damper that sustains the sound
proportionately to how deeply you press the
pedal
Sostenuto ............... Sostenuto (page 24)
Soft......................... Soft (page 24)
Expression ............. A function that lets you create changes in
dynamics (volume) as you play
PitchBend Up......... A function that smoothly raises the pitch
PitchBend Down...... A function that smoothly lowers the pitch
RotarySpeed .......... Change the rotational speed of the
JazzOrgan rotary speaker (switch between
fast/slow each time you press the pedal)
VibeRotor ............... Switch the vibraphone vibrato on/off (switch
on/off each time you press the pedal)
Normal setting:
SustainCont
See the procedure on page 80.
Setting range:
Same as “Setting the right pedal function” above, except for the
following parameters.
• SustainCont
• Expression
• PitchBend Up
• PitchBend Down
Normal Setting:
Sostenuto
See the procedure on page 80.
Setting range:
Same as “Setting the right pedal function” above, except for the
following parameters.
• SustainCont
• Expression
• PitchBend Up
• PitchBend Down
Normal Setting:
Soft (for all voices other than JazzOrgan, MellowOrgan and
VibraPhone), Rotary Speed (JazzOrgan and MellowOrgan),
Vibraphone (VibeRotor)
Specifying the Split Point
[Split Point]
Setting the right pedal function
[RPedalFunc]
B
D
NO
YES
A
C
SplitPoint
F#2
TIP
B
D
NO
YES
A
C
RPedalFunc Set?-->
SustainCont
Setting the center pedal function
[CPedalFunc]
Setting the left pedal function
[LPedalFunc]
B
D
NO
YES
A
C
CPedalFunc Set?-->
Sostenuto
B
D
NO
YES
A
C
LPedalFunc Set?-->
Soft