Putting on the bf-1, Attaching the armband, Attaching the – Yamaha BODiBEAT BF-1 User Manual
Page 17: Armband
Putting on the BF-1
BF-1 Owner’s Manual
17
Putting on the BF-1
Attaching the
armband
■
Attaching the BF-1 to the armband
1
Connect the earphone cable to the BF-1.
Be sure to push the earphone connector all the way in until it fits into place.
CAUTION
• Do not unplug the earphone cable from the BF-1 while using it. If rain, sweat
or any other liquid gets inside the BF-1 through the earphone terminal, the
device could be damaged.
• When disconnecting the earphone cable, hold the connector directly and pull
it. Do not pull on the cable.
2
Attach the device to the armband.
IMPORTANT
• Make sure that the YAMAHA logo can be seen at the top of the arm band. This is the
proper orientation for fitting to the armband.
• Insert the BF-1 fully until a click sound is heard.
Incorrect
Correct