Xerox WorkCentre Pro 75 EN - Manual (Page 77)

Xerox WorkCentre Pro/CopyCentre User Guide Page 63
T
ry Thes
e Jobs
Copying Bound Documents using Build Job
Typical Application
Copy a multipage article that is spread throughout a bound
document all at once.
Procedure
1. Open the Document Cover and place the bound original on
the Document Glass. Align the spine of the bound
document with the Book Binding mark.
2. Make your programming selections by touching the
screen. The most common selections are on the Basic
Copying tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
3. Use the keypad to enter the number of copy sets.
4. Depending on the configuration of your machine press the
More Copy Features tab or the Job Assembly tab.
5. Select Build Job then the Build Job On button. Press Save.
6. Press the Bound Originals button then press the button
that identifies which pages you want to copy.
7. Press the Start ( ) button.
NOTE Use the Build Job Controls button to see a sample of the last
segment scanned, delete the last segment scanned, or
cancel a sample print job that is currently running.
8. Repeat this process until all the pages you want to copy
have been scanned.
9. Press the Build Job Controls button then select End Build
Job.