Emergency power off, Disconnect device – Xerox WorkCentre Pro 75 EN User Manual
Page 18
Page 4
Xerox WorkCentre Pro/CopyCentre User Guide
Emergency Power Off
If any of the following conditions occur, turn off the system
immediately and disconnect the power cable from the
electrical outlet. Contact an authorised Xerox Service
Representative to correct the problem.
l
The system emits unusual odours, or makes unusual
noises.
l
The power cable is damaged or frayed.
l
A wall panel circuit breaker, fuse, or other safety device
has been tripped.
l
Liquid is spilled into the system.
l
The system is exposed to water.
l
Any part of the system is damaged.
Disconnect Device
The power cord plug is the disconnect device for this
equipment. It is attached to the back of the machine as a plug-
in device. To remove all electrical power from the machine,
disconnect the power cable from the electrical outlet.