Symbology, Electrical safety, Symbology electrical safety – Xerox WorkCentre Pro 75 EN User Manual
Page 16
Page 2
Xerox WorkCentre Pro/CopyCentre User Guide
Symbology
This symbol on the machine indicates heated surface
Electrical Safety
CAUTION
Ensure that the power connection for your machine satisfies
these requirements.
1. The power receptacle for the machine must meet the
requirements stated on the data plate on the rear of the
machine.
2. The socket outlet shall be installed near the equipment and
shall be easily accessible.
3. Use only the power cable supplied with this
equipment.Plug the power cable directly into a properly
grounded electrical outlet. Do not use an extension cord. If
you are not sure whether or not an outlet is properly
grounded, consult a qualified electrician.
Model
Power Requirements
WorkCentre Pro 90
CopyCentre C90
220-240V Outlet
Dedicated 20A circuit
WorkCentre Pro 65/75
CopyCentre C65/C75
220-240V Outlet
10A or 13A line. The
equipment must be
connected to a grounded
mains outlet